Search results

Sounds like a win [raceflag]

Steel wheels usually have less clearance for a large caliper such as the Brembo caliper on GT. A typical 225-mm wide tire should do just fine on a 7-in wide wheel. When in doubt, consult with the tire manufacturer website which usually contain such information. Tire Rack website also has this...

In the case of front license plate, I decided that the fine is worth it. It carries zero point (a non-moving violation). I get a ticket about every other year on average. I consider it a sacrifice [grinking]

None in the Stinger, however it has less than 900 miles to date.

Microfiber

The 19x8.5 US-version rear wheel has a 46.5-mm offset.

Weld quality is mediocre, it should be ok. The last piece was tack welded.

Not today. In a decade, who knows.

Yipppeeeeee! [crazyeye][crazyeye]

Whoa whoa whoa, back up a bit. In case you didn't know, a run-flat tire weighs substantially more than a regular tire. The weight of a spare tire assembly is, at least, a static and sprung weight. Four run-flat tires will introduce a very substantial increase in rotational moment of inertia and...

I would start with the recommended pressures then go from there. As a rule of thumb, I bump them about 5-10 psi to increase sidewall stiffness and to compensate for temperature fluctuation.

One with a 150 ft-lb rating would suffice and because it's only for lug nuts, there is no need to pay extra for very high accuracy.

I use a Sears brand that has a max torque rating of 150 ft-lbs and it has a 1/2" drive. It clicks when reaching a set limit. I also have a smaller one with a 3/8" drive and it has a more accurate in-lb increment. What is your intended usage of this torque wrench?

Yikes! I find it absurd that the output shaft had no oil seal that can be replaced.

Thank you. I'll keep an eye on it.

I received one about a couple weeks ago. I bought the car in early November.

Trying to see if it would stick to the dashboard with new double-sided tape and if it looked right with the "GT" emblem right next to it. A friend who's into custom clear bra installation wants to try his hand on creating the black-on-red scheme like on GM redline edition emblem.

I can probably use glue to fix it. I'll send my address through PM. Thank you.

I'm looking for the OEM "Stinger" script emblem that is applied to USDM cars (the smaller emblem, not the 14-in) for practice/research purposes. One or two would suffice. Do you have one that was taken off your car collecting dust somewhere? Minor damage is ok as long as it is not broken. Let me...

I was talking about a significant difference in OD between front and rear.